SR locker, looking for advice

[Mephisto]

I'm heading down to Portland next week and I'm thinking I should pick up a locker from an SR while I'm down there, since we never got Monteros of that generation up in the great white north. Guessing I should just call up some of the wreckers down there ahead of time, but I wanted to ask you guys what's an average price for a third member and axle shaft from an SR should cost? If there are any locals around that area that want to check out a shorty diesel Pajero and maybe help me find a locker that would be greatly appreciated. Any suggestions to make my search easier would be appreciated.

[off-roader]

Check car-part.com
if you can, buying and installing the whole axle may be easier than swapping third members assuming you have help.

[Mephisto]

I'm not bringing a trailer and we are camping/exploring on the way down and back up, so no room for an entire axle and camping gear in a shorty Paj. I've pulled the axle shafts and third member before, so no biggie there.

[Mephisto]

Oh and thanks for the car-parts suggestion.

[eurosonic]

got a locker rear-end out of 99 2.5Gen. In norcal, so might be quote of a drive for you.

[scrubber3]

Be sure to get the gearing to match your front. Also, get the air pump which is under the right rear seat. You can also get the locker ecm and switch is you want to use them. I just used a switch from radio shack and wired it straight.

[Mephisto]

So I got a locker when I was down south, threw it in a few days ago and finally got the air lines all set up today. Seems to work perfectly, tomorrow I'll put it through it's paces just to make sure. Driving around is strange now that I don't have an LSD, I kinda liked drifting around corners, now I just spin one tire I'm sure the locker will more than compensate for that loss when I'm wheelin though!!! I did the regulator and solenoid approach for my install since I already have onboard air and space is at a premium in the shorty, I made a little bracket to mount them in behind the rear side panel in the unused space above the rear wheelwell. Sorry I didn't take any pics, I'll try to remember to take one tomorrow.

[scrubber3]

I bet you can drift fairly decent with the locker engaged.... Glad you found one!

[GrassCat]

So I got a locker when I was down south, threw it in a few days ago and finally got the air lines all set up today. Seems to work perfectly, tomorrow I'll put it through it's paces just to make sure. Driving around is strange now that I don't have an LSD, I kinda liked drifting around corners, now I just spin one tire I'm sure the locker will more than compensate for that loss when I'm wheelin though!!! I did the regulator and solenoid approach for my install since I already have onboard air and space is at a premium in the shorty, I made a little bracket to mount them in behind the rear side panel in the unused space above the rear wheelwell. Sorry I didn't take any pics, I'll try to remember to take one tomorrow.

You are only using three pounds of air, right? Any more and you'll blow the locker.

[scrubber3]

Yeah, the diaphragm can only handle up to 5 psi maybe 6 max. You can actually engage the locker by blowing into the air line.... Done it. Lol