"ATO Expedition 1" build

[fire931]

Just wrapped up this complete build for a customer and figured I'd throw it up here. I'm really happy with how it turned out and I think the customer is as well. I'll have lots more pictures and whatnot in the next few days, I'm just to exhausted to do much right now. This truck showed up as a 2011 Double Cab long bed TRD Sport model with a TRD supercharger and that's pretty much it.







Here's a basic rundown of everything that was done..

-Fog Light Mod
- Map Light Mod
- Wired in existing overhead DVD player dome lights to factory circuit
- 400 watt anytime Mod
- Rewired existing CB
- Installed 2 interior 110 volt outlets to factory inverter
- Hardwired and mounted GPS as well as running an exterior antenna
- Installed Kenwood dual band Ham radio
- Installed AUX fuse box and wired in 10 switches for various accessories
- Installed IBS dual battery controller
- Installed first ever ATO dual battery tray (details to come on that)
- Installed 4xInnovations DOM sliders
- Installed BajaRack roof rack
- Made 2 custom antenna mounts for roof rack, as well as running new coax cable for both antennas and mounting
- Installed 2 10" Rigid Industries SR series light bars on roof rack
- Installed ARB front bumper with built in fogs
- Installed 2 8" Vision X lights on from bumper
- Installed 9,500 lbs Tmax winch with synthetic cable, custom plug for handheld controller and custom interior winch controls
- Installed a full set of ATO skids with first ever tcase skid made for stock exhaust crossover pipe
- Installed Vision X led rock lights
- Installed Safari Snorkel hooked to stock intake
- ATO wrap around high clearance rear bumper with hitch, rear lights, shackle mounts, hi-lift notches, and a swing arm also setup to hold 3 RotoPax cans as well as a flip down table
- Installed new backup camera on swingarm wired to stock rear mirror display
- ATO bed rack with Vision X led side and rear lighting (bed rack with be getting a custom canvas cover built)
- Installed a HUGE CVT roof top tent
- Installed ARB 80 qt fridge on a slide
- Custom "action packer" rack across front of bed mounted to bed rack
- ARB rear locker
- Installed ARB's new big air compressor under the hood
- OME 886 front springs
- OME Dakar rear leaf packs
- Bilstein 5100 shocks all around
- Wheeler's offroad extended rear brake lines
- First ever ATO U-bolt flip

[WASURF63]

Lookin' sharp! That's an impressive list of goodies.
I'm always a sucker for the white/black combo too.

[TACODOC]

Nice.

[docjake]

Would like more details about the dual battery setup please. Are you going to produce more?

[Containerized]

What tyre size?

[fire931]

Would like more details about the dual battery setup please. Are you going to produce more?

Yes it will become a standard item for us. We should have it totally ready to go in the next week or so and will start taking orders. I'll post up more info as soon as I hammer out a few of the details.

[fire931]

What tyre size?

They are 255/85 R16's on XD Enduro wheels.

[enzo]

That looks awesome!

[TangoBlue]

Very nice; that's one heckuva build list! Let's see... it took me about 4 years to get to that point. And you did it in how long?

[fire931]

Very nice; that's one heckuva build list! Let's see... it took me about 4 years to get to that point. And you did it in how long?

About 3 weeks from customer drop off to pick up.