IdaSHO
IDACAMPER
Currently in the process of nailing down electrical for my custom camper.
Vehicle is a '96 F250 Powerstroke.
Already has a 215AMP high-output alternator and dual battery setup (stock)
Plans are to run a 300AH or so battery bank in the camper. Looking at two 6V deep cycles at the moment.
Ive got a 100AMP Continuous Duty relay under the hood. 3/0 feed from the driver side battery to the relay.
I would like some suggestions as to just how fast I will be able to recharge the camper batteries, what size wire is recommended (roughly 14 feet distance), and how to make the connection itself.
With a slide in I would like some sort of weathertight connection in the bed. So far I have come up short in searches for such a connector. High current and weathertight....
Thanks for any help. :ylsmoke:
Vehicle is a '96 F250 Powerstroke.
Already has a 215AMP high-output alternator and dual battery setup (stock)
Plans are to run a 300AH or so battery bank in the camper. Looking at two 6V deep cycles at the moment.
Ive got a 100AMP Continuous Duty relay under the hood. 3/0 feed from the driver side battery to the relay.
I would like some suggestions as to just how fast I will be able to recharge the camper batteries, what size wire is recommended (roughly 14 feet distance), and how to make the connection itself.
With a slide in I would like some sort of weathertight connection in the bed. So far I have come up short in searches for such a connector. High current and weathertight....
Thanks for any help. :ylsmoke: