Thread: 2005+ Tacoma bed bolt accessibility

  1. #1
    Join Date
    Jun 2010
    Location
    Northern Arizona
    Posts
    1,732

    Default 2005+ Tacoma bed bolt accessibility

    I am installing a bed slide in the box of a 2005 Tacoma. Has anyone replaced or removed the bed bolts from inside the box. I am going to need to replace these bolts with longer hardware to accommodate the slide's frame and am wondering how accessible these bolts are within the frame.
    Thanks
    Matt

  2. #2
    Join Date
    Mar 2012
    Location
    Arizona
    Posts
    11
    What slide are you going to use?
    2012 Tacoma DB TRD 255/85/16 Toyo MT,5 FJ rims,ARB Front Bumper,TJM 9k synth winch Pro-Link,AllPro Bolt on Sliders fill plates,Asfir Aluminum Front,Mid,Gas,Transfer Skid,AllPro Shackle flip kit Timbern,CBI HC rear Bumper, Rigid Mesh Grill 20" LED bar, White Sport Grill, ARB Dual Compressors,air tanks for air tools,Dakar Leaf Pack,RadFlow 2.5" Ext travel Coilovers- front & rear shocks w/res,front sway bar delete,Camburg UCA's,SS Brake Lines,UltraGuage,Prepared by Sierra Expeditions

  3. #3
    Join Date
    Jun 2010
    Location
    Northern Arizona
    Posts
    1,732
    custom

  4. #4
    Join Date
    Oct 2011
    Location
    Vancouver
    Posts
    33
    I unscrewed my front bolts to put a tiedown underneath them. They just screw right out of the frame, the frame is threaded and you do not have to worry about losing any nuts. Hope this helps.

    I needed to use an impact gun with the torx bit though, mine were seized up. Be sure to put some anti-seize on them when you put them back in.

  5. #5
    Join Date
    Jun 2010
    Location
    Northern Arizona
    Posts
    1,732
    Thanks...good to know as I thought there was a bolt in the frame I would have to capture...
    Do you remember what size torx bit you used...I have heard t55 and t50...

  6. #6
    Join Date
    Apr 2010
    Location
    CA/OH
    Posts
    1,070
    It's a T55. Was not an easy find for me. I ended up going to a tool specialty store for it. Maybe I was looking in all the wrong places. They are fine threaded so they come out rather difficult. Even in a dry climate, I'd spray them up with WD40. There is about two extra inches of bolt under there, so for whatever you have going on, perhaps this is enough to work with. The nut is welded in place above the frame.
    Keezer
    '05 Tacoma

  7. #7
    Join Date
    Jun 2010
    Location
    Northern Arizona
    Posts
    1,732
    Great...thanks...2 inches is more than I expected...and I have a lot going on

  8. #8
    Join Date
    Aug 2008
    Location
    Cypress, TX
    Posts
    604
    Quote Originally Posted by Flagster View Post
    Great...2 inches is more than I expected...and I have a lot going on
    Quote of the day
    Ryan
    2008 Tacoma
    1968 Camaro


    "I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them" - Thomas Jefferson
    "We all dream of a world filled with sunshine, peace, and happiness. The problem is that half the people think this sounds like a wonderful place to live...while the other half think it sounds like a wonderful place to pillage."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •