"EXPEDITION" SHOWER MAT ON THE CHEAP

[General Automag]

I saw this very neat camping shower mat several weeks ago: http://www.expeditionops.com/shop/in...product_id=170. It was listed for $119, and the price made me start thinking...

I had a few left over decking balusters http://www.homedepot.com/h_d1/N-5yc1...&storeId=10051 or "spindles" as some people call them, so I decided to make and "expedition" mat myself. I spent about $12 on a quart of spar polyurethane and gave the pieces several coats. I used a 5/16" bit to make two holes in every piece in order to connect everything together with some rather narrow bungee tie downs I had laying around http://www.amazon.com/Keeper-Corpora.../dp/B00004Y62H. I have at best $25 invested in it. Of course it's not teak, but it should last just as long, and the extra $100 saved will buy us several gallons of fuel for our rigs.

I'll post pictures shortly, so tell me what you think.

[goodtimes]

I did pretty much the same thing with some left overs from some office furniture. Rather than varnish, I used some of the left over Danish Oil from the bookshelves. I usually have 20 - 30' of shock cord laying around, so the only thing I had to buy were the rubber o-rings that I used for spacers between the pieces of wood.

[General Automag]

Here are some pics of our homemade "expedition" shower mat (the expedition moniker still makes me chuckle ). I just couldn't see paying $120 for a camp shower mat... For the handle, I just wove together pieces of the bungees that I cut in order to get the plastic "balls" which I used for spacers, and it all rolls up nicely. What's great is that you can make one to any size that best suits your needs.

[General Automag]

PS Thanks to "Expedition Ops" for the idea!

[overlander]

a rubber floor mat from the front seat of a vehicle would also work well, and prove double purpose.

[General Automag]

Just today I saw this "companion table" to the "expedition shower mat." You can easily use pressure-treated decking balusters again, and it looks like you could use dowel rods or threaded rod to keep it all together. From the pictures, it looks like you could use copper pipe to make the pieces or spacers that go in between each piece of wood which should probably need to be cut approximately 1/2" long. The dimensions from the video are 1" thick by 18" long by 17" wide which works out perfectly if you use standard 1" deck balusters. With 36" deck balusters, you would only need 12 pieces. Cut all 12 pieces in half and use 10 pieces for the top and 4 pieces for the legs.

It looks as though there is a slight notch cut in the tabletop pieces where the table legs fit, and it seems you would simply need to tighten it up just enough so as to allow you to fold the legs. I love functional projects like these that you can build with the family and kids. My guess is that it will cost less than $25 to build the table, and it will be interesting to see what the vendor sells the teak table for at retail. My guess is that it will be roughly the same price as the shower mat around $120. (Thanks again to Expedition Ops for the idea!).

[ScottReb]

Exped ops stuff rocks and Jeremy is a great guy. I completely understand doing it yourself, I built my last house myself. Jeremy source recycled wood for his mats and tables. They are also very nicely constructed, I ordered the mat while at OX 10.
He should be flattered since imitation is the sincerest form.

[DontPanic42]

I made a similar mat from scrap cypress that I got from a friend who is a wagon maker. I rubbed it down with mineral oil.

[ETAV8R]

Great ideas here. I have the folding one, think it is from GSI and was $30. It isn't gonna last much longer. I was gonna get another 30 dollar one from BBB.

[chet]

I was thinking of making a shower mat from 1" PVC pipe with caps on the end... got lots of that around.