Thread: Awning/tent spikes source

  1. #1
    Join Date
    Dec 2009
    Location
    Burbank, Ca
    Posts
    73

    Default Awning/tent spikes source

    Hey all, I found this company while searching for an alternative to the Snow Peak awning/tent spikes I was wanting to buy, but seem to be out of stock everywhere.

    http://www.monkindustries.com/

    They sell many different sizes and colors, etc for different applications at very reasonable prices. The ordering process was super easy and shipping was reasonable considering the weight of the spikes I ordered.

    Check them out if you need a good set of spikes for your tent or awning or whatever... You won't be disappointed!

  2. #2
    Join Date
    Jul 2009
    Location
    Utah
    Posts
    16
    I make my own spikes. I go to a local supplier and get 12" spikes. I then weld a washer about an inch down from the head of the spike. That allows you to seat the spike to the ground, yet still allows you to slip a claw hammer over the spike head to pull it out. Plus it gives a big flat area to strike when pounding them in.

    Works quite well for me, although it seems nearly every time I go camping with new people, I always end up making them a set for their own tent.

  3. #3
    Join Date
    Apr 2011
    Posts
    117
    My Dad had some stakes fabbed when I was a kid. After a family friend stepped on a cheap metal stake shreadding their foot he got some large spikes and had the weldor down the street put on the washers. The washers were flush with the top so that there was never a chance of stubbing a toe or getting hurt. It was rare that we ever had to pry the stakes out. Every once in a while we'd have to use the hammer or hatchet to hit the head sideways to loosen the stake though.

  4. #4
    Join Date
    Apr 2008
    Location
    NORCAL/NORNV
    Posts
    1,768
    Harbor Freight has some really cool big/little stakes with green plastic clips--cheap-

    I've been using mine for over 4 years !

    JIMBO

  5. #5
    Join Date
    Dec 2009
    Location
    Burbank, Ca
    Posts
    73
    I don't weld and the spikes that come with the ARB awning are pretty cheap. I've used the 'big nails' spikes with the green plastic hook and being plastic,
    eventually the heads break. I got eight 12" spikes for less that $3 each, plus shipping. I thought it was a pretty good deal anyway.

    To each, their own.

  6. #6
    Join Date
    Apr 2011
    Location
    Pa.
    Posts
    181
    Very large nails, depends on your soil conditions though.

    Jronwood

  7. #7
    Join Date
    Jul 2009
    Location
    South OC, CA
    Posts
    534
    Give Zack a shout at Overland Gourmet. A little patience and he got them sourced when everyone except Snow Peak themselves showed out of stock. Used them for the first time this past weekend. Loved the hook to hold down the tent and the hole to use the Snow Peak Hammer to pull them out also. Nice product IMHO. Beats the heck out of the cheap stakes that came with my Springbar.
    Brent
    '94 White LC; Kaymar Rear Bumper w/tire carrier; Hanna Sliders; ARB winch ready Front Bumper; Slee Transfer Case Skid Plate; BFG MT KM2 285's, OME 850/863 Heavy 2" lift, INTI Rack; Warn M12000 Winch, Snorkel; Sputnik!
    TLCA Member #13420; KI6SGO

  8. #8
    Join Date
    Jun 2009
    Location
    Boise, ID
    Posts
    782
    Snow Peak stakes and hammer. Worth the money.
    1997 Disco

  9. #9
    Join Date
    Aug 2011
    Location
    Vermont Mountains
    Posts
    482
    I use the EMS DAC stakes I get at the local EMS

    http://www.ems.com/product/index.jsp...987&lmdn=Brand
    Last edited by AA1PR; 09-03-2012 at 10:42 PM.
    2004 GMC Yukon, 4X4 SLT, 5.3L Vortex,
    Trail Master 2.5" leveling kit, SkyJacker Shocks -upfront, EGR 1.25" Fender Flares
    Putco Punch grille insert, gamut of Putco chrome accessories, & IPCW chrome/clear Crystal Eyes taillights
    Whelen Slim-Miser LED Strobes, Husky floor liners, MF 1050 compressor....
    N-Fab light bar & Hella 700FF's
    Running on 32" 265/70/17 Cooper Discover AT3's
    1966 M416 Stevens trailer
    My username is my callsign

  10. #10
    Join Date
    Apr 2006
    Location
    Oregon, USA
    Posts
    1,558
    I have bee using orange plastic construction stakes



    I run bright orange cord through them and add my own two hole tensioner. Easier to see and fewer "clothesline injuries". They stay attached to my awnings. If camped on rock they can be slipped through the handle of some re-useable shopping bags full of dirt or rocks.

    "Speed is just a matter of Money - How fast do YOU want to go?"-mechanic from Mad Max-
    If at first you don't succeed - Don't take up Skydiving!
    - BLT Offroad KE7CSK

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •