Thread: 2011 Dodge Ram + Camper = NO XM Reception........

  1. #1
    Join Date
    Jan 2010
    Location
    Montrose, Colorado
    Posts
    87

    Default 2011 Dodge Ram + Camper = NO XM Reception........

    Due to a design flaw, the XM reception in my 2100 Dodge Ram is blocked with the camper,.....badly. Has anyone here removed & relocated or voided the oem and bought aftermarket? If so what did you go with?

  2. #2
    2008 Dodge PW + Camper + Stereo Install Shop = XM Reception. I had the same problem with mine and took it to my local stereo shop and they knew right away what to do and I think it was about $100 later they had me all fixed up. I think they relocated it to the front of the truck.
    Mark
    2008' Dodge Power Wagon, 2000' FWC Hawk(sold), 2013 Lance 865
    1997' Jeep TJ
    www.Flickr.com/photos/gpnaz
    www.MarkLarsonPhotography.com

  3. #3
    Join Date
    Jan 2010
    Location
    Montrose, Colorado
    Posts
    87
    Phx is a BIG city with lots of competition and knowledge. My town is small and not too up too date, this is why i do everything myself (except painting). I just need some part numbers with a Dodge owner in the same situation as i. Thanks.......which antennae did you use? Where is it located? Part numbers for antennae cable?

  4. #4
    I researched this a while back. IIRC, there's a connection for the antenna behind the passenger kick panel. You should be able to find another antenna on line to relocate it to the front of the truck. I think I found this on www.turbodieselregister.com. I had an antenna on the dash in my old Dodge, it worked good. I think it will depend on how far the cab over goes to where you'll have to place it.

  5. #5
    Join Date
    Apr 2012
    Location
    Hinesville, (S/E) Georgia, USA
    Posts
    238
    i ran into this problem on my Canyon when i installed the roof rack and the lights on the rack. if the truck was facing one way (example North) i'd get crapy or no reception. if truck was facing (example) south, great reception. took a while of researching to figure out. finally, i tore into it and found out i was able to just stretch the oem cable out for it to reach to the top of the roof rack. the cord was long enough. i just wrapped it in electrical tape, then wire loom and more tape. then lots of RTV to seal it all up. now the XM works like the rack was never there.
    NICK ~ CrazyEyeZ

    2005 GMC Canyon Z71 4x4 crewcab < 355Nation.net >
    -2" lift shackles, TB's cranked to level, Rancho shocks, 31x10.5x15 FireStone DestinationLE's
    -roof rack, 24v LED flood and spot lights, 2x 4ft FireSticks, Cobra 29 classic w/weather
    -custom HD bullbar with 4 130w KC DayLighters

  6. #6

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •