Page 2 of 3 FirstFirst 123 LastLast

Thread: Flip-pac mattress alternative?

  1. #11
    Join Date
    Apr 2011
    Location
    Los Angeles, Ca.
    Posts
    316
    Quote Originally Posted by sixbennetts View Post
    The mattress lays on the bunk when you close the lid, right? If you moved those 2 tubes lower, wouldn't that allow for a thicker mattress?
    I was wondering about that as well. I'll have to check out the same when its closed and see if it can accomodate a thicker mattress. I found this 4" mattress. Looks like it may work.

  2. #12
    Jason,

    I've measured mine and the mattress that came with it is a 53' X 74' "full sized mattress" instead of the queen.
    Best wishes,
    Palehorse1

  3. #13
    Join Date
    Apr 2011
    Location
    Los Angeles, Ca.
    Posts
    316
    Thanks for the dims Palehorse. Still taking notes on my options.
    Heres a good link I found on another thread in a different section.
    http://www.foamandupholstery.com/Full_Foam_Mattress.htm

    Quote Originally Posted by Palehorse1 View Post
    Jason,

    I've measured mine and the mattress that came with it is a 53' X 74' "full sized mattress" instead of the queen.

  4. #14
    Join Date
    Dec 2007
    Location
    So. California
    Posts
    116
    I have a old XL Thermarest basecamp self inflating
    mattress that I use on top of my flippac mattress and I sleep better up there than I do at home! when its time to pack up I open the valves on the thermarest and slip it between the wide side (drivers side) of the poles that hold up the flippac tent and mattress before I close up the top, This only works if I am by myself but I suppose I could fit two of them in the bed of the truck if I rolled them up. I think two regular size thermarests would fit side by side nice on top of the mattress. Btw my flippac mattress is pretty worn out, there really isnt much support left in it. Just a thought
    Some more pics. In my profile album.

  5. #15
    Join Date
    Apr 2011
    Location
    Los Angeles, Ca.
    Posts
    316

  6. #16
    Join Date
    Oct 2010
    Location
    Victorville, CA
    Posts
    331
    After our mattress was worn out we tried a couple of alternatives and finally settled on one of these: http://www.nemoequipment.com/nemo201...-pillowtop-pad. The two person one with the two air inserts. It has a foam wedge to prevent a gap between the pads.

    We can pump it up in about a minute and deflate it in about 10 seconds. Once deflated, we can store our sleeping bag and our kids bags up there too. Its not quite as convenient as having the mattress glued to the top but its easy to get everything situated on the nylon cover then flip the super light lid over.

    It's not quite as wide as the original mattress but is the right length. Our The North Face Twin Peaks double sleeping bag fits nicely on it.
    Shruk the big green muscular, obnoxious truck. Build thread:
    http://www.expeditionportal.com/foru...-Flippac-Build

  7. #17
    Join Date
    Apr 2011
    Location
    Los Angeles, Ca.
    Posts
    316
    Ordered the full size one from amazon. I won't install it for a bit but I will let people know how comfortable it is for any future inquiries.

  8. #18
    Join Date
    Aug 2010
    Location
    Central Colorado
    Posts
    118
    Robert made me a custom one for my FWC. I can lay it anywhere and fall asleep in minutes. Completely bombproof too.

    http://www.solacejh.com/matsspecs.html

  9. #19
    Join Date
    Jul 2009
    Location
    Louisville KY
    Posts
    24
    Quote Originally Posted by JasonRedwood View Post
    Ordered the full size one from amazon. I won't install it for a bit but I will let people know how comfortable it is for any future inquiries.
    Curious if you installed this yet and have you tried it out? My mattress is worn out in my FP too.
    Support your local 4x4 shop.
    http://moab-offroad.net/

    http://moab-offroad.net/smf/index.ph...sg2780#msg2780

    I'm letting all of my customers build my next rig. click here.
    http://moab-offroad.net/smf/index.ph....msg399#msg399

  10. #20
    Join Date
    Apr 2011
    Location
    Los Angeles, Ca.
    Posts
    316
    Quote Originally Posted by Bad Hair Day View Post
    Curious if you installed this yet and have you tried it out? My mattress is worn out in my FP too.
    No I have not. It actually shipped to an old address of mine and I have yet to pick it up.

Page 2 of 3 FirstFirst 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •