Gen. 3 back seat lever repair - who has done it?

**Skidmarkart** · 08-03-2012, 02:24 PM

Okay, I have been meaning to start a thread about this for a while, but it is getting close to travel season in NC (it has been too damn hot to do anything besides lay around in the AC so far this summer) and I need my back seats back in action. SO, i have read about every thread possible about this, and I am getting ready to do the job of adjusting the cable that makes the seats fold forward. I just wanted to see if anyone had any tips, short cuts, or knew how much beer I would need to buy to complete the job.

**off-roader** · 08-03-2012, 03:59 PM

Subscribed (will probably be similar for my 96)

**Lambretta** · 08-03-2012, 10:53 PM

Are you talking about the seat releasing at the base to fold it up? I will look for the pictures when I fixed mine.

**off-roader** · 08-03-2012, 11:15 PM

Originally Posted by Lambretta

Are you talking about the seat releasing at the base to fold it up? I will look for the pictures when I fixed mine.

Yes.

**kchristian** · 08-04-2012, 06:10 AM

I would love to see a write up on this as well.

**Skidmarkart** · 08-06-2012, 12:55 PM

Yeah - sorry for the delay getting back to the thread - had to go out of town unexpectedly. Yeah, if anyone has picts that would be very helpful.

This repair sounds like it may be in the 6+ beer category. That makes it is serious repair in my book.

Thread: Gen. 3 back seat lever repair - who has done it?

Thread Tools

Display