95 cj m416 build

95cj

New member
I started with a project that Matt from the forum had. The wife surprised me with it. That's a long story. Here's what it looked like when I got it home.
 

Attachments

  • 2.JPG
    2.JPG
    44.7 KB · Views: 341
  • 3.JPG
    3.JPG
    48.4 KB · Views: 340
Last edited:

95cj

New member
Then I got to work wire wheelin the the surface rust on the inside of the tub. Matt had most of the paint striped off already.:)
 

Attachments

  • 4.JPG
    4.JPG
    29 KB · Views: 341
  • 5.JPG
    5.JPG
    40.3 KB · Views: 337

95cj

New member
Then i moved onto the frame. I added 1 more crossbrace and had to narrow the axle about 4". I just cut the axle in half then bolted it in place and marked where they met and cut 1 side. Then sleeved the inside of the axle tube and welded it all together.
 

Attachments

  • 6.JPG
    6.JPG
    36.1 KB · Views: 335
  • 7.JPG
    7.JPG
    40.4 KB · Views: 336
  • 8.JPG
    8.JPG
    44.4 KB · Views: 334
  • 9.JPG
    9.JPG
    36.5 KB · Views: 339

95cj

New member
Finished up all the welding and took it apart and started the painting.
 

Attachments

  • 10.JPG
    10.JPG
    44.5 KB · Views: 330
  • 1.JPG
    1.JPG
    42.4 KB · Views: 330

95cj

New member
2 coats of PPG Durathane later I put the axle back under the frame and wired up the lights.
 

Attachments

  • 11.JPG
    11.JPG
    43.6 KB · Views: 334

95cj

New member
After the frame was done I moved back to the tub. I pounded out a few of the bad dents but left the smaller ones. I figured this thing is a 1962 it just adds character(I got lazy). Then started the 2 coats of Durathane white.
 

Attachments

  • 12.JPG
    12.JPG
    35.9 KB · Views: 329

95cj

New member
Then I mounted the tub on frame and masked it off to apply the bed liner.
 

Attachments

  • 15.JPG
    15.JPG
    43.3 KB · Views: 332
  • 13.JPG
    13.JPG
    44.8 KB · Views: 335

95cj

New member
I had new fenders made cause the original ones were pretty beat up. Now she was ready to use but far from done. I made some bows for the canvas top out of 1/2" pvc, worked out perfect till I can make a hard cover.
 

Attachments

  • 14.JPG
    14.JPG
    43.8 KB · Views: 325
  • 16.JPG
    16.JPG
    41.4 KB · Views: 333
  • trailer.jpg
    trailer.jpg
    224 KB · Views: 12

Matt

Adventurer
Dude! I found your missing crossmember in the garage while I was working on my trailer this weekend!
I dont know how it didnt get in the pile with the rest of the parts. :eek:
 

VanIsle_Greg

I think I need a bigger truck!
Let me see if I have this correct... your wife bought this for you?

If yes, please go giver he a hug from all of us, she's awesome!

:)
 

95cj

New member
You are correct sir she did buy it for me as a early birthday gift. She is pretty awesome . She also suggested we just load up the trailer and leave for this week that I'm off work.
 

Forum statistics

Threads
185,817
Messages
2,878,521
Members
225,378
Latest member
norcalmaier
Top