I've build a lid for my M416 and assembled it and put it on top of my M416 with a RTT and a bike rack. I took it on a bike race trip this weekend and it did great, the only thing I have not finished yet is the latching mechanisum. I am currently using rachet straps. I have bought a few latches from McMaster Carr, but nothing really fits or works. I have looked at the multi point latches, my concern is breaking the integrity of the lid from a leakage standpoint; but I like the idea and ability to open both sides from one location.
I have attached a few photos showing the set up. I was hoping to get some ideas on some other setups. I have to be able to lock it as well. I am not against the idea of securring to the top of the lid, I can deal with the sealing if needed.
I have seen Blackburns set up and I am toying with the idea of using his latching set up.
Thanks for your ideas and suggestsions,
Jeepcrz
Here is a side view.
Another view.
There is 3" from top of lid to the bottom of my support frame.
I have attached a few photos showing the set up. I was hoping to get some ideas on some other setups. I have to be able to lock it as well. I am not against the idea of securring to the top of the lid, I can deal with the sealing if needed.
I have seen Blackburns set up and I am toying with the idea of using his latching set up.
Thanks for your ideas and suggestsions,
Jeepcrz
Here is a side view.
Another view.
There is 3" from top of lid to the bottom of my support frame.