Page 1 of 2 12 LastLast

Thread: 94 Gmc Sonoma Rebuild

  1. #1
    Join Date
    Oct 2008
    Location
    Roundup MT
    Posts
    1,497

    Default 94 Gmc Sonoma Rebuild

    I have owned this truck almost 4 years. It has not been used in 2 years. Parts have been used on other rigs.

    The plan is to install narrower Toyota front and rear axles. Then remove the 3" body lift left over from its 2wd days. Lower it a few inches.in the front and.clear 33/35 tires.
    2000 5.4 superduty crew cab short box Warn 12m 315 MaxxisBighorns

  2. #2
    Join Date
    Oct 2008
    Location
    Roundup MT
    Posts
    1,497
    I have a large pile of parts building up at the local Oreilly.

    New brakes bearings seals steering. They have really gone the.extra mile for me.

    I did manage to get some work done today. I was able to get 8 of the needed 16 bolts to pull my body lift off. So the cab is back down to where it should be. We also where able yo measure how the Toyota parts will fit. This should turn.out nice.
    2000 5.4 superduty crew cab short box Warn 12m 315 MaxxisBighorns

  3. #3
    Join Date
    Oct 2008
    Location
    Roundup MT
    Posts
    1,497
    How in the world do.i.get pictures to upload from.my.phone
    2000 5.4 superduty crew cab short box Warn 12m 315 MaxxisBighorns

  4. #4
    Join Date
    Oct 2008
    Location
    Roundup MT
    Posts
    1,497
    2000 5.4 superduty crew cab short box Warn 12m 315 MaxxisBighorns

  5. #5
    Join Date
    Oct 2008
    Location
    Roundup MT
    Posts
    1,497
    Last edited by 98dango; 12-02-2012 at 02:49 PM.
    2000 5.4 superduty crew cab short box Warn 12m 315 MaxxisBighorns

  6. #6
    Join Date
    Oct 2008
    Location
    Roundup MT
    Posts
    1,497
    Not much more.for.Saturday got done. I did dig out some things like my.power inverter and dual battery wiering. Sunday the lady wanted to.go.take pictures. So we ran to Cook City finding we could not get there up the Bear Tooth hwywe went.The we truck is still up there .I know what Saturday project is now.
    2000 5.4 superduty crew cab short box Warn 12m 315 MaxxisBighorns

  7. #7
    Join Date
    Nov 2012
    Location
    Calgary, AB
    Posts
    8
    Good to see more S10's here. But, your lowering it to clear 33"s??? How high is it?

  8. #8
    Join Date
    Oct 2008
    Location
    Roundup MT
    Posts
    1,497
    Zshe used to.clear 40s. This truck was built in a weekend. to go play with my.dad. Now I'm after much.more.usable truck.
    2000 5.4 superduty crew cab short box Warn 12m 315 MaxxisBighorns

  9. #9
    Join Date
    Nov 2012
    Location
    Calgary, AB
    Posts
    8
    I see. I am looking forward to seeing how it progresses.

  10. #10
    Join Date
    Oct 2008
    Location
    Roundup MT
    Posts
    1,497
    It's currently going more backward than forward. Got the leaky 241 out today. A friend needed the shift fork and rail for his 51 Willys. My 231/205 doubler should be a better set up.
    2000 5.4 superduty crew cab short box Warn 12m 315 MaxxisBighorns

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •