robert j. yates
Explorer
I've received a few questions on how I have my auxillary coolers plumbed in so I snapped a couple of quick phone pix this morning for the folks asking.
For reference, there is a framerail mounted billitt style cooler that I bought from Currie, plumbed in immediately off the transmission. This acts as a precooler and the fluid is then routed to a B&M fan driven cooler mounted under the tub on the drivers side above the rear axle. This cooler is driven by a thermo switch set at 160*. I have the switch routed through a relay due to the draw from the fan as I did not think the 20amp fuse harness provided with the kit was sufficient. I am no longer using my radiator at all for the transmission.
Feel free to take a look and ask questions.
For reference, there is a framerail mounted billitt style cooler that I bought from Currie, plumbed in immediately off the transmission. This acts as a precooler and the fluid is then routed to a B&M fan driven cooler mounted under the tub on the drivers side above the rear axle. This cooler is driven by a thermo switch set at 160*. I have the switch routed through a relay due to the draw from the fan as I did not think the 20amp fuse harness provided with the kit was sufficient. I am no longer using my radiator at all for the transmission.
Feel free to take a look and ask questions.