Page 1 of 5 123 ... LastLast

Thread: 1st gen trucks for expeditions?

  1. #1
    Join Date
    Jun 2006
    Location
    Off the Pacific Coast somewhere
    Posts
    204

    Default 1st gen trucks for expeditions?

    After some debt refiguring and some thought, I have decided to build up a 79 Toyota Hi-lux for future mini-expeditions. For the most part, it will be all about making the rig reliable and comfortable, but I don't think that will be too hard. Anyone else use one of these older trucks for trips?
    Been some places, done some things.

    http://www.altastrekker.com 1979 Toyota 4x4/ 1978 GMC Pathfinder 4x4 Van

    http://www.expeditions.com M/V National Geographic Sea Bird

  2. #2
    Join Date
    Apr 2006
    Location
    The Highest State
    Posts
    3,801
    My friend Dean did until a couple of years ago. His is a 1980 long bed, which he still has (took the camper off and it's moving towards rock crawler status slowly). He just changed out to a 1985 for the XtraCab for long trips. Turns out a 6'4" guy doesn't fit into a regular cab as well as he gets older...
    Last edited by DaveInDenver; 03-15-2011 at 04:03 PM.

  3. #3
    Join Date
    Dec 2005
    Location
    Temecula Valley
    Posts
    9,768
    My first Toyota was a 79 3/4 ton long bed with the 20R, and I had a topper so I could sleep in the back. Years later, that truck is still driving around back in my hometown!

    Great machines, I say go for it!
    Dave Bennett, Member #203

    Travel, Explore, Live: AMERICAN ADVENTURIST

  4. #4
    kcowyo's Avatar
    kcowyo is offline Expedition Portal Moderator ExPo Original
    Join Date
    Jun 2005
    Location
    Lander, Wyoming
    Posts
    5,199
    I had some great adventures in my '85 with it's SA and 22R.



    The first thing I did was swap in a set of leather buck seats from a newer 4Runner. That upped the comfort level quite a bit. It was never a powerhouse but it was steady and reliable and took me to some fun spots around Wyoming.







    My needs eventually changed slightly, but with a small suspension lift and some decent tires, it is a smart platform. I had envisioned doing a sub-$5K build up with it. Spare fuel, water and a sleeping platform would allow for going anywhere. It's lack of horsepower also had me looking at a winch, just in case.

    A simple and reliable powertrain with good aftermarket support should make for an "easy & economical" build. I would start learning as much now as possible about tweaking carburetors if you plan on travelling to areas with varied elevations.
    '97 Toyota T100 - some stuff and some stories....
    '85 Toyota FJ6O - fractal cruising

    currently listening to - Jamey Johnson "The Guitar Song"
    recommended reading - Into the Story by David Maraniss

  5. #5
    Join Date
    Apr 2006
    Location
    The Highest State
    Posts
    3,801
    Quote Originally Posted by kcowyo
    I had some great adventures in my '85 with it's SA and 22R.
    This is the truck I remember first seeing attributed to you... But I won't point out that a 1985 is a 2nd gen 4WD. ;-) The only real downside to a 1st gen truck is parts availability. Mechanically, super simple and from that standpoint, a good choice. But spares availability is rather limited when compared to later trucks, particularly the 1989-1995 and Tacoma.

  6. #6
    kcowyo's Avatar
    kcowyo is offline Expedition Portal Moderator ExPo Original
    Join Date
    Jun 2005
    Location
    Lander, Wyoming
    Posts
    5,199
    Oh yeah...


    ....and thanks for not pointing that out. Either way, old school junk can be fun to build and run.
    '97 Toyota T100 - some stuff and some stories....
    '85 Toyota FJ6O - fractal cruising

    currently listening to - Jamey Johnson "The Guitar Song"
    recommended reading - Into the Story by David Maraniss

  7. #7
    Join Date
    Feb 2007
    Location
    Colorado Springs, CO
    Posts
    607
    I had an 82 3/4 ton long bed I wish I never sold. It was super fun and cheap. Last I heard it had 322000 miles on it and still going strong.
    2000 4runner
    Fluid Fabrication 69er

  8. #8
    Join Date
    Apr 2006
    Location
    The Highest State
    Posts
    3,801
    Quote Originally Posted by kcowyo
    Oh yeah...


    ....and thanks for not pointing that out. Either way, old school junk can be fun to build and run.
    Well, not only am I stickler for details, I'm an understanding, nice fella, too. :-)

    Cool thing about old Toyota pickups is that they have a taste of that old school, restoration stuff without being totally obsolete. Some stuff is the same on all trucks, like differentials. Other stuff is totally wacked, like the L43 transmission. But the 20R shares the same tranny mount pattern as a 22R block and so converting to a W56 or G52 is easy, should you want to change out trannys. So it's not like you're trying to keep a 1958 Austin Gipsy going or something.

  9. #9
    Join Date
    Feb 2007
    Location
    Englewood, CO
    Posts
    4,075
    KCOWYO: Great pics!

    Let me guess: Are the first three photos from the Red Desert/Oregon Buttes area?
    Martin AKA Zapp Branigan KD0PHH
    2007 Toyota 4runner SR5, 4.0 V6

    Wife's Vehicle: 1995 YJ "Captain Morgan"

    And our Homebuilt Teardrop Trailer "Bubbles!"Other Rides: 2008 Triumph Scrambler; 1997 Mazda Protege (Daily Driver)

    "I am the Man with No Name - Zapp Branigan!"

  10. #10
    Join Date
    May 2007
    Location
    valley of the sunstroke, AZ
    Posts
    1,983
    i too put many a mile on an early pickup, mine was a 1980 longbed. awsome little truck i wish i still had. this was back when the truck wasnt even 10 yrs old but nontheless that truck went to alaska twice and i think i drove almost every mile of WA state with it before moving to AZ.
    Clay
    75 BDJ55- biopig

Page 1 of 5 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •