Snorkel for a 94-01 Dodge?

[Hunter]

Howdy gang,

I was wondering if anyone had a lead or made a snorkel for a Dodge Ram, 94-01 body style? Maybe something that could cross over?

Thanks.

[FlyingWen]

I just looked into the ARB Safari Snorkel for the Dodge Ram and found Nadda!

I didn't see any write up for possible interchange parts either.

Let me know if you find anything. I am curious

[Hunter]

I got an itch several years ago to do it, but there was nothing on the market at the time. I am hopeing someone mayeb might have come up with a design.

Its a real pain of a vehichle. The hood and fender set up, plus the radio whip make it a real challenge. I got a few ideas do use metal tube, but I would prefer a well formed ABS type. And so the search goes on.......

[Bella PSD]

I am surprised that there is no snorkel for the Dodge. You would think there would be one by now.

Louie

[BigAl]

I had a 98, the stock connection to the intake always leaked for me I wouldn't trust anything that retains the stock airbox. If noone responds, try pavementsucks.com. There are a lot of RAM gurus overthere, good luck

edit: You peaked my curiosity, so i found these over there

[Willman]

Home Depot sells one!

J/K

Sorry....couldn't hold back on this one!



Now that would be a sweet mod!!!

Keep us posted if you go that way!

[big sky trapper]

Home depote or a pipe bender like i did for a guy on his ranger...
Muffler pipe will stand up alot better than pvc....

[Hunter]

Well, I have spent a few nights in google land and have struck a big zero for anything commercial. I got on a kick pretty hard about 4 years ago when I first bought the truck, but didnt find much so I let it go.

Fast forward 4 years... and I have ONE payment left on my Dodge and it's mine . Im keepin' it and now I can afford to upgrade everything that has bugged me for years.

I have seen alot of snorkels rigged for Dodges but nothing that has suited my intrest. I openely admit, I have to have it look good. I own a 4x4 shop and it needs to be pro looking. I got some plans and have been brainstorming for the past week.

BIGSKY, went the way I think I am going to go. I built a snorkel like that for my Land Cruiser 10 years ago and it has been great. What is going to be a trick is that the Dodge front end has some of the most unfreindly lines and will make one looking it belongs a real trick. I got some ideas I am goi g to start messing around next week.. I will definatly keep you guys posted!

P.S. That is a wicked bad paint job on that Ranger.

Thank you for all the links too. They have helped alot.

[fisher205]

I liked this thread for a snorkle on my '94 Dodge. "DIY snorkle to suit any rig". It was under vehicle mods. Sorry I don't know how to tie a shortcut to it
- Brad

[Hunter]

I started on the snorkel. I had some time last night at the shop and finshed the main tube. I still have to figure out what intake I am going to use and work on the (scoop) and work on the part going into the fender. Got the lower mounting figured out and now just to work on the upper. I'll try and get some pics up this week.

Im useing 3" exhaust tubing.