Recent content by elcoyote

  1. elcoyote

    ***SOLD*** 2008 Ram 2500 4x4 SLT Regular Cab, 6.7 Cummins Diesel with 2015 FWC Hawk Flatbed Camper

    SOLD. Proud new owner of Pepe has surfing adventures planned.....Lucky Pepe!
  2. elcoyote

    AT Tacoma Habitat: Official Thread

    Epic shot!
  3. elcoyote

    ***SOLD*** 2008 Ram 2500 4x4 SLT Regular Cab, 6.7 Cummins Diesel with 2015 FWC Hawk Flatbed Camper

    ***SOLD*** 2008 Ram 2500 4x4 SLT Regular Cab, 6.7 Cummins Diesel with 2015 FWC Hawk Flatbed Camper We are selling this well-built and proven Ram truck for $50,000 firm. It has been in our family since 2015. We built it originally to showcase the FWC Flatbed product for shows. It has...
  4. elcoyote

    AT Tacoma Habitat: Official Thread

    James, where are the puddles forming to be exact? We're happy to get it sorted out for you.
  5. elcoyote

    Anyone with an AT Overland Summit?

    We don't have any pictures of the modification. It simply moves the bed platform hinge point rearwards.
  6. elcoyote

    Anyone with an AT Overland Summit?

    If you came into our shop we could relocate the hinge point. It would take half a day.
  7. elcoyote

    Anyone with an AT Overland Summit?

    Yes, that is correct.
  8. elcoyote

    FWC flat bed shell

    As the Four Wheel Camper Arizona territory dealer, I can tell you that while the subject has been brought up often, FWC is emphatic that they will not offer a shell version of the flatbed. :-(
  9. elcoyote

    Anyone with an AT Overland Summit?

    I'm 5'10" and do not have foot clearance issues. Upon special request, we can move the hinge point of the bed platform aftwards to give you a bit more room in the foot area.
  10. elcoyote

    XPCamper goes out of business, files for bankruptcy?

    Marc's claim to be a consultant for Adventure Trailers is an absolute lie! As the President of AT I can assure you of that!
  11. elcoyote

    Anyone with an AT Overland Summit?

    You could attach to inside on the upper box beam. If you want to attach to the inside of the wall, we advise bonding in place with UHB tape in addition to rivnuts as our honeycomb composite on the inside has a FRP surface. The two loops are Petzl climbing anchors that give you a place to hang a...
  12. elcoyote

    Anyone with an AT Overland Summit?

    Did you purchase through one of our dealers or direct from us at AT? Either way, we will help you resolve any hatch leaking issues. My first suggestion is that if you have a gap in the bulb seal at the bottom of the hatch, remove the bulb seal and re-insert it to move the gap to the top. This...
  13. elcoyote

    Anyone with an AT Overland Summit?

    If you're putting L track on the roof, mount centerline of track at 1.5" from outer edges of roof line with 1/4" - 20 rivnuts into the aluminum box beam. The material is .090 thick. If you wish to mount L track anywhere else on the roof, same applies but be careful to not drill all the way...
  14. elcoyote

    AT Tacoma Habitat: Official Thread

    I suggest the K9 axe & shovel brackets from Equipt1.com
  15. elcoyote

    Anyone with an AT Overland Summit?

    To confirm for you Jim, we use a 3/4" honeycomb composite in the construction of the walls, ceiling and for the bed platform. Super nice video by the way! Do you mind if we share it? Mario
Top