Search results

  1. 4x4junkie

    MURS Mobile Transceivers

    Yeah I've been hearing about the license-by-rule petitions for GMRS as well. I recall a discussion somewhere (Radio Reference maybe?) that the use of repeaters would go by the wayside if that happens. There are a LOT of repeaters currently up on the band (around my area I hear repeaters on top...
  2. 4x4junkie

    Best value in 12V fridges, Indel B vs Dometic

    Yep. And not too long ago they made the cutoff voltage adjustable. I bought my Edgestar 43qt in 2010. It's been one of the best purchases I've made. No problems with temperature uniformity either, things are just as cold up above the compressor unit as they are down in the bottom.
  3. 4x4junkie

    New Ranger/Bronco SFA rumor

    That looks like a nice truck (you wasted no time getting a little mud on it too I see :) ). So it sounds like you didn't have any real issue with the axle/suspension other than with the automatic hubs (which mechanically-engaged automatic hubs tend to be problematic no matter what axle they are...
  4. 4x4junkie

    New Ranger/Bronco SFA rumor

    LMAO Jealous, are we? :D (sure sounds like it) Definitely not a fanboy but yes I do like the vehicle. Just so happens that I knew what a good vehicle was that doesn't fall apart when you try to seriously offroad it, doesn't beat you up on the highway, and actually has some amount of room inside...
  5. 4x4junkie

    MURS Mobile Transceivers

    Very true. I guess I'm just trying to figure out why GMRS and/or ham come up so often before MURS as a replacement for 11m CB (an unlicensed (license-by-rule) short range personal radio service)... Almost never is it mentioned, even with the caveat you'd need to repurpose a handheld as a mobile...
  6. 4x4junkie

    New Ranger/Bronco SFA rumor

    The Xterra isn't with us anymore. 4Runner sales are about half of what Wrangler sales are. The FJC was laughed at because it had IFS and a non-removable top, and wasn't real accessible to the aftermarket (that should tell you something right there when people were buying 10 shoddy-quality...
  7. 4x4junkie

    New Ranger/Bronco SFA rumor

    The Bronco was never truly IFS. At it's end it did have the TTB axle which technically can be considered as IFS, but it wasn't quite the same thing as the A-arm IFS that everything else uses currently. It actually was on a similar level of durability & modifiability as a solid axle and could...
  8. 4x4junkie

    MURS Mobile Transceivers

    This is why I mentioned use of something already existing (PCB from a MURS handheld), it would greatly reduce (though not entirely eliminate) the cost for a majority of those items. This was an exceptionally common practice with CB base station radios. Nearly every one contained a PCB virtually...
  9. 4x4junkie

    MURS Mobile Transceivers

    ^^ I agree, though I don't think it's an unreasonable proposition for someone to bring to market a mobile MURS transceiver... All a company needs to do is mount an existing PCB from a handheld design radio into a small flat box chassis, add a 12VDC input onto the back and a mic jack (and of...
  10. 4x4junkie

    Quick Antenna Question

    Top-loaded antennas (Francis, Firestik, etc.) will be less affected by stuff in the vicinity of the antenna base than base-loaded antennas (Wilson 1000/5000, K40, etc.) will. Something to keep in mind if it will be near a roof rack piled with gear. The taller the antenna, the less affected it...
  11. 4x4junkie

    Antique CB?

    Sounds like maybe the mic is miswired (mic connector fits in the radio, but each pin is wired different). I know this is the case with Midland vs. Cobra 4-pin mics. I'm not familiar with that Regency, but you might see if you can get the radio to TX and/or RX by jumping the pins together in the...
  12. 4x4junkie

    How long should I expect a mid-priced 12v Fridge to last?

    Going by past threads here, it seems the temp sensor is the most problematic part of any fridge, regardless of it's price point. AC power supply units maybe 2nd... perhaps followed by freon leakage. Temp sensor replacements and PS unit swaps can often be done DIY. Finding a shop that can...
  13. 4x4junkie

    2006 Mazda B2300 Build Thread

    This really depends on how much sun you get, the outside temperature, and how willing you are to reposition the panel to follow the sun with it. I have a 170W bi-fold (suitcase) panel that's more than enough for my fridge (43 qt) though I'm also usually the one who provides the tunes and lights...
  14. 4x4junkie

    "Budget" Vehicles for DD/OL/Expo

    The Ford Explorer is a good solid truck that I didn't see mentioned yet... I see '91-'01 models (inc. '02 & '03 Sport) go for as cheap (or often even cheaper) than the XJ. I think they're more solid vehicles too (after all, they do have a frame, and interestingly the Jeep guys seem to revere...
  15. 4x4junkie

    Dual battery install: DONE! - Uh, Sort of...

    Sure thing. Glad to hear you made a new friend and you got it straightened out. Experience is the best way to learn things, because that is how you know if something actually works or if it doesn't work. ;) Hard to argue with that. FWIW, those screws sticking out with nothing on them look like...
  16. 4x4junkie

    Basic rigs?

    You should have no trouble with trails as high as 3.0 on that list with a stock '93-'97 Ranger with the 31" tires and having the limited-slip in the back. After some mods on mine (lift, tires, lockers) I was on ones as high as 4.0 before I got my Bronco II. Like others have said, the vehicle...
  17. 4x4junkie

    Dual battery install: DONE! - Uh, Sort of...

    Your post (and the link within it) names tools that will do a 360° (hex or diamond) crimp (and you show a cross-sectional of one a couple posts later), it doesn't directly mention the importance of it. Without emphasis on this it tends to slip by without notice. There are several mentions of a...
  18. 4x4junkie

    Dual battery install: DONE! - Uh, Sort of...

    lmao FWIW, I've seen numerous complaints that the dies for that $50 HF crimper are all sized wrong, so you'd need to experiment (wasting several lugs) to find which one is actually the correct size for a particular gauge wire & lug-type combo. Once you've figured that out it apparently works...
  19. 4x4junkie

    2006 Mazda B2300 Build Thread

    The tire gate will hit up against the trailer jack, any tongue box you might have, and/or possibly even the trailer itself. I've suffered through this on my BII, it's a PITA when you can't open the tailgate or hatch because you can't swing the tire gate over far enough (forcing you to drop the...
  20. 4x4junkie

    Dual battery install: DONE! - Uh, Sort of...

    Indeed it is. Clean materials always make better, more reliable connections. This is no different for soldered or crimped connections, so I'm not sure what you're getting at as far as that goes... I have dissected many of the soldered connections I've done and there were no voids and all the...
Top