Search results

  1. RememberTheFallen

    Kiki 03 Ford E-350, 6.0 Diesel, Van Conversion

    Running high horsepower tunes will lift the heads too but coolant is one of the overlooked issues. Double check that Evolution unit you linked works on a van. I got the regular Edge CT3 monitor and will have to get a separate tuner. Edge also will tell you that they design their stuff for the...
  2. RememberTheFallen

    Kiki 03 Ford E-350, 6.0 Diesel, Van Conversion

    I am far from an expert on this engine so take everything I say with a grain of salt. Sportsmobile forum has a lot of great reading on the subject and is more helpful than most places because it focuses on the detuned van 6.0 (240hp-ish) and not the truck one that was bumped up in power...
  3. RememberTheFallen

    Kiki 03 Ford E-350, 6.0 Diesel, Van Conversion

    My wife and I just bought a 6.0 van to convert after doing a 5.4 gasser. We needed additional towing power as well. Working on the engine now. Wanted the know if you planned on running a hot tune and if that's why you are going with new head studs? Everything I have read is that they aren't...
  4. RememberTheFallen

    DIY FRONT & REAR BUMPERS

    Must be looking at the wrong page.... Is the DIY option $3300 cause that's the only option on there? Sent from my Pixel 3 using Tapatalk
  5. RememberTheFallen

    DIY FRONT & REAR BUMPERS

    I am guessing that's for the complete finished bumper. If not, I am right there with ya. Sent from my Pixel 3 using Tapatalk
  6. RememberTheFallen

    DIY FRONT & REAR BUMPERS

    Hey Jeremy, those look great! Your link for the rear bumper shows only a built bumper (I hope...) and not a DIY kit. Sent from my Pixel 3 using Tapatalk
  7. RememberTheFallen

    Tubs: My 2004 E350 Build

    So it's been a minute but thougth get back on and give an update and ask a question. We have travelling in the van a good bit but bought a large camper to live in full time until we can build a house so needed a bit more oomph! Saw a guy selling a MG 4WD coil kit plus axles and transfer case...
  8. RememberTheFallen

    Replace Engine or Move onto Newer Van?

    Thank you! I hope to unveil some cool stuff at Expo East this year. The vendor price is very steep but I hope to still be able to be there! Sent from my SM-G950U using Tapatalk
  9. RememberTheFallen

    Replace Engine or Move onto Newer Van?

    Hopefully it's ok to post... www.WheelisKnives.com Sent from my SM-G950U using Tapatalk
  10. RememberTheFallen

    Replace Engine or Move onto Newer Van?

    I should mention that the knife business is not very lucrative right now! Lol Transitioned from a paramedic to full time knifemaker about 8 months ago. Getting everything set up is extremely time consuming but not financially rewarding right now. Catch 22. Don't have time to mess with van but...
  11. RememberTheFallen

    Replace Engine or Move onto Newer Van?

    Mine is the 4R75W. This is my daily driver. Fortunately I work at home so have been able to make due. That being said I am extremely busy with a knifemaking business and hardly have time to get the valve covers off let alone source a 6.8, trans, and all the accessories to switch over. If I...
  12. RememberTheFallen

    Replace Engine or Move onto Newer Van?

    That's what I thought. I am completely happy with the power of the 5.4 other than in the Rockies. V10 would be nice but way more hassle and time. Sent from my SM-G950U using Tapatalk
  13. RememberTheFallen

    Replace Engine or Move onto Newer Van?

    Hope not. It's ticking not knocking. We shall see soon! Sent from my SM-G950U using Tapatalk
  14. RememberTheFallen

    Replace Engine or Move onto Newer Van?

    Dont think it is an easy swap. Read somewhere about a guy trying and it wasn't working. Would need the trans as well as the motor. Imagine the ECU as well. Sent from my SM-G950U using Tapatalk
  15. RememberTheFallen

    Replace Engine or Move onto Newer Van?

    Completely missed this. I will check this out. Haven't had a chance to mess with the van getting ready for the Blade Show. Now that it is over I can tear inti the van tomorrow. Thank you! Sent from my SM-G950U using Tapatalk
  16. RememberTheFallen

    Key piece of gear for Bear Country.

    Yeah, tense night for sure! Hung it out away from camp, 10ft off the ground, over an arm sized branch. Woke up about 10pm to what I thought was a raccoon trying to get into it. Walked down in my boxers to see the biggest black bear in history (Guinness Confirmed!) drop down out of the tree. I...
  17. RememberTheFallen

    Replace Engine or Move onto Newer Van?

    Ok, I will try that. It has been going thru a lot of oil recently but I thought it was due to a leak I had. Looked earlier and the leak isn't enough time account for the 3-4 quarts over 4000 miles. Sent from my SM-G950U using Tapatalk
  18. RememberTheFallen

    Replace Engine or Move onto Newer Van?

    My temper was making it far worse! Here is a short video of the sound. Seems worse with the dog house off. Sticking my ear to the oil pan and I could feel the ticking... Disregard, evidently I can't post videos thru Tapatalk any more. Sent from my SM-G950U using Tapatalk
  19. RememberTheFallen

    Replace Engine or Move onto Newer Van?

    No worries, I appreciate the help anyway! Everything I Google for "5.4 engine tick/knock" leads to the cam phasers. I have to add in the 2v part to filter it. Sent from my SM-G950U using Tapatalk
  20. RememberTheFallen

    Replace Engine or Move onto Newer Van?

    Will do. Thanks! EDIT: so Google says my 2v 5.4 does not have cam phasers. Only the 3v 5.4. Sent from my SM-G950U using Tapatalk
Top