Search results

Moving on to the roof and kicking myself a little bit for making the camper just over 96 inches long. Joints are half-laps and seams were glassed. Fitting the roof to the lower part of the shell. I intentionally oversized the roof by about 1/2 inch on all sides then trimmed it to its final...

Bonding the fixed cabover portion of the bed into place. The sides and the roof are all 1 inch panels but I opted for 1.5 inch panels for the bed floor. Kerf cutting the side panels that wrap around the above bed corner. I made a few test bends with scraps then knocked out the real pieces on...

Hi! Long-time lurker and I decided that it's finally time to start posting. This thread will mostly be a recap of my pop-up truck camper that I built between October 2022 and April 2023. Also big thanks to underkill for their excellent build thread...

These would probably be sufficient for a bed platform: https://www.grainger.com/category/material-handling/structural-framing-systems/press-fit-framing-systems?brandName=80/20&filters=brandName I ordered polypropylene honeycomb core panels from Carbon Core last year, total shipping to a...

Is the idea to make the box removable or will you be bonding the partitions (basically stringers in the boat world) directly to the camper? If bonding to the camper, then butt joints between the verticals and the floor using cabosil thickened epoxy would work well. Add fillets and fiberglass if...

Thanks! It's a DIY project, I'll post a build thread about it one of these days. Also whoops, replied to the wrong user before.

I used LEDs from mattgecko in my pop up. Mine are warm white only but they offer a red/white option.