Search results

What wheels are those? Looking forward to pics on the Jeep

What top is that?

It’s a miracle the UPS guy searched for and found that package! Above and beyond his required job duties I’m pretty sure.

New member here. 2015 JKUR. Lots of mods, and more to come. Gobi stealth has been on order for 8 weeks. Tepui Autana 3 RTT waiting in the garage for the rack! After a driveshaft upgrade, I’m going to focus on a kitchen and ARB fridge set up. And dual battery...and...

They are definitely for sale

Not the best comparison pic as I should have taken a before pic this morning, but this is what the new springs (and front spacer) resulted in: Before: After:

Yeah I’m happy with it. When I start adding the weight of the roof rack, etc., it will level out I’m sure

Installed OME springs. I netted 7/8” inch both front and back from the AEV springs with the added spacer up front. So now I am right at 3” of lift. Looks like the rear is sitting higher than the front, so I’m going to remeasure after driving it a little bit. Definitely wish I would have...

So just measured.. I am 2” all the way around with the AEV coils. I’m thinking about the OME coils with a 3/4” spacer on the front 2619’s. I’m guessing the rear 2620 will be in the 3” range once installed and with the spacer, the 2619 will net 2 3/4.

Awesome and thanks for your help.

So on the front coil, the measurement from perch to tower is 9 3/8” on a stock JK. I am assuming a 4 door Rubicon would be closer to + .47 inch, or 9 7/8”? Just trying to get an idea of where I started when stock.

Good stuff right there. I’ve never seen that diagram. I’ll measure my current set up and compare with the stock measurements and see where I’m at with the AEV coils now. One concern with the OME is the rear will shoot up to 3”+ since it doesn’t have a huge amount of weight on it and the front...

I have a 2015 JKUR that currently has an AEV 2.5 DS lift. I have started adding weight due to mods over the past year (ARB bumpers front and rear, Warn XD9i, steel oil and trans skid, gas skid, TeraFlex tire carrier with hilift mount, etc) and I am adding more with a Gobi Stealth, part time...

Great thread and perfect timing or me right now. I have the AEV DS 2.5”, and have added (and will add) a lot of weight and was thinking about coil or a new lift. Right now I have ARB bumpers front and rear, Warn 9000i winch, steel skids, TeraFlex tire carrier, and 315’s. I have a Gobi stealth...

First post, and I read the whole thread. I had to laugh some as it seems like there’s a lot of worrying going on! Then I think of myself and if I had posted my Jeep buildup over the past 2.5 years, it would probably have came across the same. I have a similar build. I bought a stock 2015...