1986 Toyota Pickup 4x4 Replacement Leaf Springs

[DirectDrive]

I didn't but just checked out their website. $695 for a pair of leafs w/o bushings. Yikes! That's too rich for this budget build.

I looked around online and found that the range is about $100 - $200 plus shipping.
I wouldn't be surprised if the lowballers were of Chinese origin.
I would want American steel.

Consensus seems to be 3 regular leaves and 1 overload leaf (3+1) configuration.
Bushings included would be nice.

 

[Soobarubin]

If you are looking for budget, I did the ZUK mod on my 4Runner. Improved everything, height, ride, flex, and I don't compress my spine on every bump.

http://www.gearinstalls.com/

Some very good writeups on that page of the ZUK mod, and it can be done with about $60 and about an hours time.

-Jaren

 

[Airmonger]

Reviving and old thread. Did you ever find anything and get it installed? I just picked up a stock 86 pickup and am in the same boat. I don’t want a 4 inch lift, just reviving the suspension a bit. I was looking at the OME rear springs and some rancho shocks. The person at the auto parts store told me the ranchos would give me a 1 inch lift in the front.

Anyone out there looking at suspicions for a IFS toyota Pickip?


Sent from my iPhone using Tapatalk