2018 Ram 3500 Expedition Family Adventure Vehicle

Dalko43

Explorer
Awesome to see that ARE truck cap in place. How is it secured to the bed?

Did you ever consider going with the reinforced fiber glass cap (I think its called the HD series)?
 

Kingsize24

Well-known member
King...can you post a side view picture of your truck with the topper installed?

No problem. Was loading up the truck today to head out of town to do a little lite camping/hunting for a couple days. She is pretty heavily loaded though with all the kids toys and supplies. Looks like I need a very slight bit of lift in the rear when loaded.

20190104_124009.jpg20190104_124016.jpg20190104_123957.jpg

Awesome to see that ARE truck cap in place. How is it secured to the bed?

Did you ever consider going with the reinforced fiber glass cap (I think its called the HD series)?

It is bolted in 6 locations to the bed where the plastic caps on the side normally clip in.

I did at one point, but the static load on this was 150lbs higher for the roof. I like the aluminum better as well.
 

Pnwfullsize

Active member
Awesome to see that ARE truck cap in place. How is it secured to the bed?

Did you ever consider going with the reinforced fiber glass cap (I think its called the HD series)?

Just wanted to chime in as I have an hd series topper. I even had ARE add a 3rd crossbar so I could have more options when it comes to mounting a tent. The rack works great, still cant decide if I prefer the fiberglass look or the utilitarian look of the aluminum toppers.
 

Dalko43

Explorer
Just wanted to chime in as I have an hd series topper. I even had ARE add a 3rd crossbar so I could have more options when it comes to mounting a tent. The rack works great, still cant decide if I prefer the fiberglass look or the utilitarian look of the aluminum toppers.

Seems like the HD series combines the best of both worlds: fiberglass shell keeps the weight down, but the internal aluminum skeleton adds some reinforcement for heavier roof loads.

I believe the HD series has a higher weight rating vs the regular fiberglass caps, correct?

DCU is likely a bit more robust by comparison.
 

Tex68w

Beach Bum
No problem. Was loading up the truck today to head out of town to do a little lite camping/hunting for a couple days. She is pretty heavily loaded though with all the kids toys and supplies. Looks like I need a very slight bit of lift in the rear when loaded.

View attachment 491860View attachment 491861View attachment 491862



It is bolted in 6 locations to the bed where the plastic caps on the side normally clip in.

I did at one point, but the static load on this was 150lbs higher for the roof. I like the aluminum better as well.


Looking good! It just blows my mind how much these trucks swarm 37's, they look like stock tires on our rigs.
 

Pnwfullsize

Active member
Yes its load rating is increased. Snugtop offers their reinforced cap that comes close to the ARE HD load rating however it is still just fiberglass and what sold me on the ARE Is their crossbars are also rated at 550lbs for a pair. So even if you went with a 500lb reinforced snugtop, you have to find bars that are also rated that high.
 

Riddler6.7

New member
I love the front bumper, but am curious of it still allows for enough airflow through the intercooler? I pull a pretty heavy 5th wheel so I certainly don't want to raise air temps.

Sent from my SM-G892A using Tapatalk
 

Kingsize24

Well-known member
Air bags and Daystar cradles.
Yup, shop it right and it won't cost you more than $350 total.

Just placed an order for some last night. Was just a tick over $350. Paid 376.98 shipped. Thanks for the info!

Just wanted to chime in as I have an hd series topper. I even had ARE add a 3rd crossbar so I could have more options when it comes to mounting a tent. The rack works great, still cant decide if I prefer the fiberglass look or the utilitarian look of the aluminum toppers.

I struggled a bit with the same thoughts as you. Ended up settling with the DCU due to the double doors, ability to add a 4th crossmember for even more rigidity, ability to add dual internal frame supports, as well as a few other small items that was not available on the HD. All in all, I don't think the look is as nice as an HD would have been if you want a more sleek profile, but I am not going for a sleek look on this build. I want form to follow function, and most everything so far has been to do that. It doesn't mean I don't add look specific items, but it is not the primary goal if you get my drift.

Looking good! It just blows my mind how much these trucks swarm 37's, they look like stock tires on our rigs.

Yea, it is crazy. They make 37's look like 33's. :p

I love the front bumper, but am curious of it still allows for enough airflow through the intercooler? I pull a pretty heavy 5th wheel so I certainly don't want to raise air temps.

Sent from my SM-G892A using Tapatalk

I have had it in some super warm temps pulling, and haven't had any issues at all yet. I would say that it would be fine. May be something you call ARB and talk to their tech specialists on however. This pic was while pulling this past summer in 102 degree Texas heat. Oil and coolant temps stayed fine. Had about 10k lbs on it at this time.

20180605_153205.jpg

Did ARB bumper help or hurt your approach angle? It’s definitely a looker!:cool:

I would say it hurt it over stock front bumper with 37's, but about the same as with a stock front bumper and stock tires. I still prefer it however due to the protection provided, among other things.

You need to post some pics of that new grill!

This is all you get for now! Bugs, mud, and all! :LOL:

20190117_163604.jpg
 

ttengineer

Adventurer

Forum statistics

Threads
185,533
Messages
2,875,610
Members
224,922
Latest member
Randy Towles
Top