315mm Front brake upgrade

haolepinoy

Incomplete Idiot
#31
NS/NT front brakes bolt on but require 17” wheels IIRC and you have to swap the knuckles. Someone in the US did the swap and has the parts list. I think there is a thread also on the Pajero Australia forums.
Thanks KyleT. The international factor scares me away from this option, specifically where to find replacement parts (if at all).

I'm a Gen 3 guy too! Working on sliders right meow.
I thought I heard you say somewhere that you were selling your Gen 3 to get an Outlander or something...

Sliders you say? Perfect since I've bought everything else you make for the Gen 3 (if you don't count Marks t-case gears). Thanks for the Black Friday birthday present spending spree excuse. Looking forward to installing the skids and sibi bushings.
 

Toasty

Expedition Leader
#32
Well I've decided to keep it a while longer and do some things, installed an ARB front bumper and I'm doing the sliders. Probably do a rear bumper then hopefully sell it for an Outlander GT so i can R&D that.
 

haolepinoy

Incomplete Idiot
#33
Well I've decided to keep it a while longer and do some things, installed an ARB front bumper and I'm doing the sliders. Probably do a rear bumper then hopefully sell it for an Outlander GT so i can R&D that.
On behalf of fellow Gen 3 guys, I applaud your decision and look forward to whatever "some things" you have in mind.