Bluetooth or RF aux light switch panel

[mep1811]

I am going to add some aux lighting to my Porsche Cayenne . I was going to tap into the fuse box for power but think with all the computer controls on the electrical system I'd just grab some power from the battery .

The firewall seems to be sealed and I don't want to make a hole for switch wiring. So I'm looking for a Bluetooth or RF switch panel to control the lights.

Any recommendations? I've seen some online but like recommendations from real users.

Thanks

 

[dreadlocks]

Your Cayenne battery isint under the seat? There should be no problem using an add-a-fuse in the main fuse box either.. it wont mess with any computer controls.. you can even populate an unused fuse slot if you get the right crimp pins or jumper wires.

 

[Hillbilly Heaven]

Here is a bluetooth control system I have looked into. Just remember that their devices are weatherproof not waterproof. They were a little slow in responding to my email questions but did reply.
http://www.ridecontroller.com/

 

[Hillbilly Heaven]

Also forgot that SPod makes some bluetooth items as well.

4x4sPOD™ - Power Management Solutions

sPOD™ power management solutions are engineered to provide a simple and safe way to control any 12/24v electrical accesory from a central control panel.

www.4x4spod.com

 

[mep1811]

I found this in Four Wheeler magazine. Both Bluetooth and RF. http://triggercontroller.com/

Might be what I'm looking for.