Colman Deluxe Kitchen Mod's

Mr. T

Member
The Colman Deluxe Kitchen legs do not adjust at all which can make it fun finding a place where it is level or putting something under the legs to level the kitchen. So I did a mod to the legs so that I can level it with little effort.

Parts needed to one leg 3/8 nut, 3/8 wing nut, 3/8 x 2.5" carriage bolt.
Drill 3/8 hole in the center of the plastic foot insert.
With small file enlarge opening on both side’s so that the 3/8 nut can be inserted (file away plastic only on the side toward the bottom of the insert).
The wing nut is to lock carriage bolt in place once you get the kitchen level.
See Pic’s
 

Attachments

  • IMG_0825.JPG
    IMG_0825.JPG
    1.4 MB · Views: 34
  • IMG_0823.JPG
    IMG_0823.JPG
    1.3 MB · Views: 31
  • IMG_0822.JPG
    IMG_0822.JPG
    1.5 MB · Views: 30
  • IMG_0802.JPG
    IMG_0802.JPG
    1.3 MB · Views: 30
  • IMG_0803.JPG
    IMG_0803.JPG
    1.2 MB · Views: 31
  • IMG_0804.JPG
    IMG_0804.JPG
    1.2 MB · Views: 34
  • IMG_0828.JPG
    IMG_0828.JPG
    1.4 MB · Views: 56
  • A78135A9-C634-4978-A91D-88CBD5D04343.jpeg
    A78135A9-C634-4978-A91D-88CBD5D04343.jpeg
    2 MB · Views: 47
Last edited:

Mr. T

Member

Attachments

  • IMG_0840.JPG
    IMG_0840.JPG
    974.7 KB · Views: 28
  • IMG_0831.JPG
    IMG_0831.JPG
    1.3 MB · Views: 28
  • IMG_0841.JPG
    IMG_0841.JPG
    867.7 KB · Views: 27
  • IMG_0839.JPG
    IMG_0839.JPG
    1.9 MB · Views: 27
  • IMG_0846.JPG
    IMG_0846.JPG
    1.7 MB · Views: 28
  • IMG_0851.JPG
    IMG_0851.JPG
    1.6 MB · Views: 31
  • IMG_0853.JPG
    IMG_0853.JPG
    1.3 MB · Views: 31
  • IMG_0852.JPG
    IMG_0852.JPG
    1.3 MB · Views: 31
Last edited:

huachuca

Adventurer
Nice mods, thanks for posting. I have a couple of the older models of these - one dating back to the mid eighties and an Exponent version circa 2000). Both have seen a good bit of use and have held up well.
 

Forum statistics

Threads
185,533
Messages
2,875,597
Members
224,922
Latest member
Randy Towles
Top