theREDwonder
Observer
I built some drawers. But now I am selling my truck and want to get this setup to someone who will appreciate it. Checkout the link for all the pictures.
$800 OR BEST OFFER for the drawers and I'll happily install them in your truck for you. It anchors to the bed in the rear through the holes that had the hold down anchors, no drilling or anything required, direct bolt in!
These will fit in a 2nd or 3rd Gen (2005+) Tacoma in either the 5' bed or the 6' bed. With the 5' bed, there will be a ~4" gap near the front of the bed. The 6' bed install would have the larger 18" cubby that I designed in.
The pictures are from last year, but all of the wood is carpeted and everything complete. I will get more pictures up this weekend.
I have roughly ~$900 in materials for the drawers and likely close to 100 hours of labor. For less than the price of a decked system you get way more usable volume and a way nicer looking set of drawers.
I will say having drawers has completely changed camping in the truck. It is soooo much easier to organize things. The back of the truck is no longer just 1 giant pile of bags and stuff. I'll likely be building another set of these for my next truck!
Specs:
Weight: 221 pounds
Internal Drawer Sizes:
21" x 51" x 8.75"
16" x 51" x 8.75"
The drawers themselves were custom made by Drawer Depot in San Diego
Drawer slides are 48" long made by Drawer Slides Inc. There is one lock in/ lock out slide on each drawer. (2 locking slides was redundant and not needed)
These are located in Huntington Beach, CA near the harbor.
Last edited:
