Titanpat57
Expedition Leader
I've had these 2 Frontrunner cans for several years, and although I love the cans, the spigots never really worked as well as it could.
After pacing up and down the plumbing aisle at Home Depot, this was the fix I came up with.
I did get some 3/4" conduit nuts that fit perfect, make sure and put the teeth towards the spigot handle when you crank it on. With a little Teflon tape and a new 1" rubber O ring..it is finally a home run.
Its a quarter turn valve, and works great...it doesn't stick out any further than the original valve.
After pacing up and down the plumbing aisle at Home Depot, this was the fix I came up with.
I did get some 3/4" conduit nuts that fit perfect, make sure and put the teeth towards the spigot handle when you crank it on. With a little Teflon tape and a new 1" rubber O ring..it is finally a home run.
Its a quarter turn valve, and works great...it doesn't stick out any further than the original valve.