Opening wall ideas

Neil

Observer
It wasnt the fineness of the mesh that was thecl issue for us. They simply got round the sides or just fell to the bottom and crawled through the vent slots ( seitz 4 )

We tested our new screens in Amazonia and the Brazillian rain forrest this year and they held up really well.

Going back to the original op , it would be hard to secure a large side opening and this for us now would be a major consideration.

Neil
 

BunyipBen

New member
I came across this design on an Australian U1700L38 build, I like the idea of the wall panel opening which also has window fixtures installed so can still function closed.
their travel blog;
https://www.facebook.com/greataussieadventure/
You could always just use a mosquito net over the bed for sleeping in a more open air environment


16252447_1562945993720663_7854578944626562244_o.jpg


13528403_1336640126351252_7406416199090022568_o.jpg

13576688_1336640109684587_7849007658472505261_o.jpg

14435161_1411417058873558_8574121899424254031_o.jpg

1187128_1205683032780296_4263093581744958771_n.jpg

1904156_1205682986113634_2395856968145594528_n.jpg



11863285_1128045500544050_2382268416651381772_n.jpg

11043353_1034473403234594_1186067968651097271_o.jpg

11046759_1034473413234593_6131903305212650772_o.jpg

11046853_1034473419901259_299418762869859261_o.jpg

10998889_1034473489901252_3610780483775253237_o.jpg

10995908_1034473536567914_7286655976014256426_o.jpg

11046861_1034473543234580_3190247596848263836_o.jpg

10320916_1034473556567912_6041058757103634465_o.jpg

10991667_1034473576567910_9048086914789035903_o.jpg

11025265_1034473616567906_2045871038240798610_o.jpg

11052883_1034473656567902_2115060666577996018_o.jpg

11015325_1034473659901235_3003102386443769592_o.jpg


10565286_895637827118153_3579813954415866416_n.jpg

154479_559101654105107_1310881248_n.jpg
 

Peter_n_Margaret

Adventurer
The OKA has a bed-over-cab. Because the roof clearance is a bit limited, I put a pop top over just the bed that is hinged at the front and is held up by gas struts.
The vinyl insert has large fly screen openings with zipped coverings on 3 sides.
We sleep north-south with our feet at the front although it is possible to sleep the other way and it is possible to sleep with the pop top down..
DV00280.jpg
If that was not enough, the whole of the vinyl insert could be unzipped, the pop top could stand almost vertical on the gas struts and it was then possible to sleep under the stars.
DV00279.jpg
In practice, we rarely used the feature and when I remade the vinyl insert, I abandoned it.
Cheers,
Peter
OKA196 motorhome
 

IdaSHO

IDACAMPER
I came across this design on an Australian U1700L38 build, I like the idea of the wall panel opening which also has window fixtures installed so can still function closed.
their travel blog;
https://www.facebook.com/greataussieadventure/
You could always just use a mosquito net over the bed for sleeping in a more open air environment


16252447_1562945993720663_7854578944626562244_o.jpg

Thats pretty awesome.

I considered doing something wild like that when designing our camper, but abandoned it out of simplicity, and worries about leaks.

I am still considering a redesign though, perhaps just the rear wall section opening up that way.

It would definitely make eating at the table much more enjoyable, in good weather. :cool:

45220638235_d726e388ea_c.jpg
 

waveslider

Outdoorsman
We have a lot of windows in our truck, but need the bug screens all the time, the idea of a big opening is ok, but we would never use it unless we had screens. In saying that, having only a few windows like some of the European trucks, we get very claustrophobic.

Agree. The number of times that we could have a window/door open and NOT need a screen are few and far between. We also noticed the severe lack of windows in a lot of designs and tried to tip the scales in the other direction, by adding a ton of windows, despite the fact that it diminishes the climate control realities a bit.
 

C p weinberger

Active member
My wife and I are big into the sun/ light, and are planning expedition camper to tour in only cool to hot climates in central/ South American, but will have heat system to camp at higher altitudes. I grew up in Wisconsin and know what “cold” means.
I think the large hatch/s with built in window looks very promising but comes at a price.
..Insulation is compromised.
..bugs, I’ve had malaria multiple times, not fun, will have mosquito net above bed as extra precaution as needed but keeping biting pests out of habitat is a priority
..Storage efficiency/ space is compromised.
..We will accept dust infiltration as unwelcome consequence but aim to minimize. In my experience it was always the flexing of the body at the joints that allowed Dust in, less flex less dust
.. as for structural integrity from large cut-outs, don’t feel that it’s that hard to incorporate into even a severe 4x4 duty habitat using either wood or metal or fiberglass, I have no experience with composites but they look to be best suited to large cut-outs.

I believe I saw an OKA in Harare, Zimbabwe in mid 90’s at demo, anybody know if that was possible?
Chris
 

Peter_n_Margaret

Adventurer
Last edited:

VanIsleDave

New member
Thank you all for your input! I love the openness of Greataussieadventure, however I have been forced to admit to myself that the down sides outweigh the benefits. I appreciate all of you sharing experiences.

The basic idea of K.I.S.S., coupled with a need for storage and optimizing for cold and wet mean I may be opting for more windows, but no opening wall.
 

Forum statistics

Threads
185,541
Messages
2,875,674
Members
224,922
Latest member
Randy Towles
Top