Post Van Parts For Sale Here please

Bikersmurf

Expedition Leader
You have this posted all over the internet yet you dont reply to people that enquire. I emailed you, messaged you and responded to your posts on multiple forums as well as craiglist and you didnt reply to any of them. That was at least 4 days ago now. this post should be removed.
74D02E86-C506-403E-810F-EDD04AF963CD.jpeg
Looks like a reply and an explanation… hope you’re able to connect with him and get it sorted out.
 

blakeape

Adventurer
I just added pictures in the posting in the classified section. I’ll take $450 plus shipping on the adapter and t case.
thanks
Jake.
406 two four nine 8817
 

b. rock

Active member
Professionally removed Ford EB high top, a la shuttle top style, presumably vintage 2006. If you're 5'8" and below you should have standing height, which puts it at a 16"-18" top. My wife is 5'10" and it was just too short for her to stand, as a reference. If someone can tell me where the 'official' height of a top gets measured, I can pull a tape and measure it but 16"-18" is the range I see walking around it. Edit: this is a reverse flange top, and is bare fiberglass on the other side.

Comes with pre-installed fantastic fan, plus the controls.

Small hole drilled right above the cab area - maybe for an antenna? Not sure, was there when we got the van. Otherwise no leaks/cracks/etc.

Located in Evergreen, CO.

Not 100% what these go for, especially with the fan already installed, so let's start at $1500 OBO with you picking it up. If I have to deliver it along the front range, let's chat as I'd have to rent a trailer.

For what it's worth I picked it up from Timberline using a U-Haul car trailer - it straddles the open center just fine.
 

Attachments

Last edited:
  • Like
Reactions: WVI

justbecause

perpetually lost
We are going to look at an 01 e350 on Friday in KY.
If anyone in North Alabama, Tennessee, or near/around somerset KY has a 2nd or 3rd row seat we are interested, we will also need to replace the rear tires before heading home. If anyone has a 1/2 way decent set of wheels/tires I would be interested in picking those up vs buying some temporary tires and having to wait for them to get mounted and balanced.
 

Byzantine51

New member
Gaucho style bench/conversion sleeper. Removed from a Ford E-series van. DoT approved, includes mounting hardware. 59”W x 18”H x 40”D as bed. Vinyl upholstery in good, used condition, no tears or burns but some discolored spots. Can for scale, not included. Located in CB South, Colorado. Delivery to CB, Mt. CB or Gunnison possible but local pickup preferred. $300 obo.
 

Attachments

Neilg

New member
Edit: Sold the 30 amp Camco power cord.

Still have the Maxxair 4000K roof fan. Brand new, never installed. (Went with the remote control version...). $100.
PXL_20210926_220116449.jpgPXL_20210926_220137564.jpgPXL_20210926_220131125.jpgPXL_20210926_220154531.jpg

I'm in Las Vegas, NV. Local pickup is preferred but I'll ship this stuff if you can pay shipping.
 

Attachments

Last edited:

dgregorycope

New member
Hello. I'm selling part of a Weldtec Baja Grocery Getter lift kit. Long story short-- I had the entire kit installed in 2019. Some ************** smashed into me a few months later and I had to replace the Ibeam and radius arm on the drivers side. So I have a bent Ibeam and radius arm for the passenger side available. In the pics you can see the damaged parts that had to be replaced. Asking $500 for both. In LA near Dodger Stadium.
 

Attachments

Vandiesel

Member



All my takeoff items from my big brake upgrade. Dynatrac steering knuckles, Moog ball joints, brakes pads and rotors all in really good shape, worn HD locking hubs. All came off my Dynatrac Dana 60 from my 2006 sportsmobile. Also vacuum booster and brake lines. Not sure what they are worth. Look worse in pics as it’s surface rust from being in the rain during the install. All the brakes and ball joints have less than 15k on them.


Sent from my iPhone using Tapatalk
 

Justgosurfin

Active member



All my takeoff items from my big brake upgrade. Dynatrac steering knuckles, Moog ball joints, brakes pads and rotors all in really good shape, worn HD locking hubs. All came off my Dynatrac Dana 60 from my 2006 sportsmobile. Also vacuum booster and brake lines. Not sure what they are worth. Look worse in pics as it’s surface rust from being in the rain during the install. All the brakes and ball joints have less than 15k on them.


Sent from my iPhone using Tapatalk
What brakes did you go with?


Sent from my iPhone using Tapatalk
 
Top