Quadrotrac

Got about $700 worth of hydraulic tubing:

19433063ut.jpg


The bender works great:

19433029gm.jpg
 
Doing my best getting back to work, but this stuff is really expensive. Was about $700 for the tubing and another $500 for the connectors and stuff. But i should get it the next days and then i can start to bend some tubing...
 

java

Expedition Leader
Ouch thats spendy, But hardlines will be worth it!! Cant wait to see this thing done.
 

chilliwak

Expedition Leader
I know these things are at a high cost Steinez. You should see what I spent on my rigs this year!:Wow1:
 
Well, that`s the plan. Not actually be completely finished but ready for some test driving. If it`s working i`m planning on building a grooming sled for it so i can use it, before finishing all the small stuff that will be left to finish it.

Going to start bending some tube tomorrow. Just need to find out how to do this, so the finished tubes actually fit...

19483303us.jpg
 

chilliwak

Expedition Leader
Wow:Wow1:Steinez this stuff is just way to technical for me...:Wow1: i do enjoy following the work you are doing....:drool:
 
Started building the rear body panel today:

19508988sy.jpg


19509028zb.jpg


Drilled it:

19509037wm.jpg


Needed some washer to reinforce it, so i made some:

19509058dj.jpg


19509061hx.jpg


19509064he.jpg


Everything together:

19509065ur.jpg


Tacked on:

19509066zy.jpg


Then i started bending the easiest tube:

19509069bi.jpg


Finished:

19509089uk.jpg


Fit`s great:

19509094ub.jpg


And the second one:

19509098wj.jpg
 
Yes, it takes an insane amount of time...

Tried to figure out how to run the lines using some welding wire:

19541261cs.jpg


Then i started bending one of the more complicated lines:

19541268mj.jpg


And of course i messed it up, but at least i could save part of it for another :

19541289py.jpg
 
Started with the second line to the front hydraulics:

19551175px.jpg


Got the fitting mounted:

19551162ai.jpg


Installed:

19551203sx.jpg


Then i made the first line to the left auxillary circuit:

19551218zk.jpg
 

Forum statistics

Threads
185,527
Messages
2,875,533
Members
224,922
Latest member
Randy Towles
Top