Sewing Thread....A discussion on making your own adventure textile gear.

[williaty]

Brings up one of my pet peeves: All the tables sag

Do I level like you did from the ends of the table (since it should look the best visually)?

Do I level the bed of the machine itself (since that determines oil flow)?

Do I level the area of the table nearest to the needle (since that's where I work)?


Grrrrrrrrr!

 

[BritKLR]

Brings up one of my pet peeves: All the tables sag

Do I level like you did from the ends of the table (since it should look the best visually)?

Do I level the bed of the machine itself (since that determines oil flow)?

Do I level the area of the table nearest to the needle (since that's where I work)?


Grrrrrrrrr!

So true! I've often thought of adding a couple pieces of aluminum angle stock to make the table straight but, then I visit several large commercial sewing manufacturers and all their tables sag.......

 

[BritKLR]

Super fun project with Go-Treads! Check it out if you use their traction mats!