Snow Peak Addiction

That’s a great idea I didn’t think about, I have a bunch of Frontrunner stuff already but haven’t tried a flatpack yet. I’ll have to pick one up soon!
Another option is the UG-080 multi purpose carry bag. They are designed to carry the single BBQ box.

We've got about half a dozen of these bags and find them so useful for everything.




Sent from my iPhone using Tapatalk
 
Had a little grill weekend in the north of the Netherlands. Got to do what the SP gear is meant for....use it :)

Took the box and table. Still happy with my DIY sliding lid on the box. My fellow grillers usually take truckloads of stuff, but I am most happy with a setup like this.


Had a nice 'Ribroast done like a steak' APL style. Very tasty.



Some portobello mushroom, marinated and served with avocado and chimichurri. These things are a sponge for flavours. Not bad at all :D


Happy cooking. Eet smakelijk !
 
I have a race weekend planned this summer, with a couple of buddies. Since we'll be camped at the track all weekend, I'll be bringing a trailer for the pop-up canopies, which means all kinds of room for a grand SP kitchen. I'm already salivating at the possibilities, since I rarely get to set up and use anything lavish. Lennart, your past efforts are going to be central to my menu planning! Keep it coming!!
 
90 second video of some of Snow Peak’s newest gear. It’s not a thorough review or anything. I was filming my trip to Odaiba and this was a small part of that trip. Gave me a chance to try out my new Osmo Pocket video camera. :)



Sent from my iPad using Tapatalk Pro
 
The aluminum tape trick on the adjustable legs worked like a champ. I did take some fine sandpaper to the inside of the outter leg-tube to "deburr" the detent holes. After some tweaking the wobble is almost nonexistent.
 
The aluminum tape trick on the adjustable legs worked like a champ. I did take some fine sandpaper to the inside of the outter leg-tube to "deburr" the detent holes. After some tweaking the wobble is almost nonexistent.
Thanks for responding. I played around a bit with different amounts and layers, but it would eventually catch and peel off the outer layer while extending them out. Both rolls of Al tape I have are from past projects, so I may just buy a new roll and see if the adhesive might have been too old. I'll have to work on the inside of the detent holes, as that may be what is catching the tape. Also going to try applying it to the outside of the inner leg, instead of the inside of the outer leg.
 
Stunning work as usual Yuman Desert Rat (y)
Lennart, thanks brother! I've been away from the machine for far too long. It felt good to create again. Even though my arm is killing me from hours of continuous work.. lol

I know this is probably sacrilegious, but I just finished this case last night. Its for my PDW Knife/cutting board set. Its like the Snow Peak variant, but on steroids with 2 knives
 

Attachments

Thanks for responding. I played around a bit with different amounts and layers, but it would eventually catch and peel off the outer layer while extending them out. Both rolls of Al tape I have are from past projects, so I may just buy a new roll and see if the adhesive might have been too old. I'll have to work on the inside of the detent holes, as that may be what is catching the tape. Also going to try applying it to the outside of the inner leg, instead of the inside of the outer leg.
I only needed 1 layer with no overlap. It took a while. The lower hole us the hard part. Im going to do some further tinkering (when I get a chance) to perfect the process...
 
90 second video of some of Snow Peak’s newest gear. It’s not a thorough review or anything. I was filming my trip to Odaiba and this was a small part of that trip. Gave me a chance to try out my new Osmo Pocket video camera. :)



Sent from my iPad using Tapatalk Pro
Isnt it against forum rules to post up pornographic videos ??? LMFAO!! 🤣😂
 
Top